Order by:   Filter results: 
Web Code Reference Description Category Price
16209 1-0001-002 KNX - SONOS GATEWAY AUDIO

Controlling up to 10 Sonos master devices plus up to 50 slaves simply via the KNX– no longer a dream of the future thanks to this adapter newcomer by ise! Choose to control each room separately or the complete house via the party mode.
Crystal clear hi-fi sound and nearly unlimited sound scenarios: the Sonos sound system enhances digital music with a varied landscape of wireless speakers and audio systems. This sound wonder only has one drawback: until now, it had to be controlled via a special app, especially during zone use; a handicap for all KNX users!

But now, the ise smart connect KNX Sonos connects this sound family to the world of KNX and makes it even easier to handle. With dynamic zone formation, up to five Sonos master devices can be connected via IP and each can be linked with up to five Slave units. Hereby, either each master device is assigned its own music program or one master device controls the complete device set-up.

Features:

control to play playlists
title, artist, and album in running text on KNX text objects.
total volume control of master, slave, and the complete group
dynamic zone building for up to five zones with one master each and up to five slave devices via KNX objects
playing music from the SD card in ise smart connect KNX Sonos
for ETS version 4.2 resp. 5.0.2 or higher

 

16209
1-0001-002 KNX - SONOS GATEWAY AUDIO
16210 1-0003-004 GATEWAY ISE SMART CONNECT KNX REMOTE ACCESS SYSTEM DEVICES

ISE SMART CONNECT KNX REMOTE ACCESS

Secure remote access from anywhere, whether mobile or landline. Unpack, connect and you’re ready to go.

Users and electricians profit from the significant advantages of remote access: Easy set-up and secure remote installation and configuration make work
considerably easier and save money when it comes to configuration, maintenance and care.


Teleservicing from anywhere

It has never been so secure and uncomplicated to connect to the KNX system remotely. You can forget about expensive house calls from your system integrator. Desired changes and system maintenance can be carried out quickly and individually, anywhere in the world – even while on the go.

Teleservicing from anywhere

Important events on your smartphone

Would you like to know whether everything is OK at home? Let your house tell you. You'll receive messages on your smartphone, e.g. when your smoke detector is activated or when someone rings your doorbell. You can decide whether you would like to be informed by telephone call, text message or e-mail. You can also receive images from the camera and values from the KNX (e.g. room temperature).

Important events on your smartphone

Remote access to your visualization

You can also access your web-based visualisation remotely, giving you an overview of your building at all times.

Remote access to your visualization

Security

Decide who may access your system with the simple push of a button using our access and user management. Thanks to data transfer encryption, there’s no chance of prying eyes.

Security

Not accessible from the Internet?

Is the IP address of your connection not accessible from outside, e.g. a unitymedia (IPv6), an LTE or UMTS connection? No problem. Our solution works here, too. Unpack, connect and you’re ready to go.

Not accessible from the Internet?

+ POINTS

  • + Robust and simple access from everywhere (ETS, GPA, Homeserver, IP devices, camera)

  • + Quick setup, no router configuration necessary and no VPN

  • + Independent of provider and type of Internet access (IPv6, LTE, etc.)

  • + Security through access control and encryption

  • + The smart home uses e-mail, SMS or voice message to send information on events

  • + Meet customer wishes quicker, no more appointments or journey times

  • + No follow-up costs (excluding SMS services)*

This is how installation and communication works with Remote Access

The Remote Access is simply connected to the home network. It then connects to the portal server (www.securedeviceaccess.net) automatically through
your existing Internet connection. Communication between the Remote Access and the portal server is encrypted and secured with digital certificates.

With a connection to the home network, you can now access almost all of your network devices using the Internet. Depending on the network protocols supported by the respective device, access occurs directly through the SDA portal server or through the "SDA client" software available for windows platforms. If you have a KNX installation in your house, you can connect it to the ISE SMART CONNECT KNX REMOTE ACCESS using the KNX connection if desired. This enables you, or your electrical installer, to access your KNX devices from anywhere, e.g. with the ETS.

Don't worry, though. The portal server is located in Germany and is subject to the German Data Protection Law.

16210
1-0003-004 GATEWAY ISE SMART CONNECT KNX REMOTE ACCESS SYSTEM DEVICES
16212 1-0002-003 GATEWAY KNX - PHILIPS HUE ISE SMART CONNECT GATEWAYS

This device is a product of the KNX system and complies with the KNX guidelines. Detailed specialist knowledge gained in KNX training courses is assumed for understanding.
Functionality of the device is dependent upon software. Detailed information about software versions, specific ranges of functions and the software itself can be found in the manufacturer's product database. Planning, installation and start-up of the device is with the aid of KNX-certified software. The up-to-date product database and technical descriptions are available on our internet page.

Proper use
With the KNX system, the innovative KNX adapter lets you control up to 25 Hue lights via dimmer or switch. From warm to lively, the lamps’ LED technology opens up the wide spectrum of light hues. Individual RGB values can be set for each individual lamp. The KNX control element lets you choose comfortably between complete light scenarios and separate control.

Product features:
- control up to 25 Hue lights via ise smart connect KNX and the Philips Hue-bridge
- separately control up to 25 Hue lights via dimmer or switch
- individual control of RGB colour hues possible
- choose comfortably between complete light scenarios and separate control
- simple connection of visualisation systemsand facility management systems
- For ETS version 4.2 resp. 5.0.2 or higher

16212
1-0002-003 GATEWAY KNX - PHILIPS HUE ISE SMART CONNECT GATEWAYS
16901 S-0001-006 The ise smart connect KNX Vaillant + eBus adapter GATEWAYS

Together with the new multiMATIC controller, the ise smart connect KNX Vaillant offers the integration of eBUS and KNX, thus also enabling the comfortable integration of Vaillant heating systems in the KNX system.
The ise smart connect KNX Vaillant allows you to implement innovative solutions for your intelligent house:

You won't be at home for a longer period of time. KNX enables you to perform an occupied-home simulation today, allowing you to conveniently activate the alarm system. With the ise smart connect KNX Vaillant, you can now also switch your heating system to "standby mode". This allows you to reduce the room temperature setpoint values in all rooms (if desired) and minimise heating.

Do you want to be able to react to short-term changes in use quickly and easily (longer than usual periods of absence, events, parties, etc.)? With the ise smart connect KNX Vaillant, the times and setpoint values for heating and hot water can be changed temporarily, or you can adapt ventilation control (especially through ventilation boost) to your current requirements.

In combination with the Vaillant multiMATIC 700 heating regulator, the ise smart connect KNX Vaillant and the ise eBUS adapter, you can now integrate the heating system, ventilation system and/or the yield and consumption values in building scenarios, visualisation and facility management systems.

Features:

Control of operation mode and temperature setpoint values for up to three heating zones
Control of operation mode and temperature setpoint value for hot water supply
Control of ventilation system operation mode
System information like service mode, error messages, date and time, outside temperature, system status
Yield values of solar systems and heat pumps
Consumption values for hot water supply and heating (electricity, gas)
only for systems with multiMATIC heating regulator
for the latest version of ETS4 or ETS5

16901
S-0001-006 THE ISE SMART CONNECT KNX VAILLANT + EBUS ADAPTER GATEWAYS
18130 A-0001-008 ISE smart app KNX Axis GATEWAYS

Two-way communication between the KNX and the world of Axis cameras.

Features:

30 binary Group Objects to trigger via the KNX an Event-Trigger on the Axis IP product
30 Group Objects (variable length) to send values from the Axis IP product to the KNX
Control video recording
Trigger to send a message defined in the camera (e-mail, TCP, HTTP, HTTPS)
Using PTZ cameras, it is possible to navigate to predefined positions via KNX
Reading and sending camera configuration properties to the KNX
Sending a value to the KNX if the camera’s live stream is accessed
Supervision of the camera device, e.g. overheating or interruption of the connection to the storage location for videos
Third Party applications may send values to the KNX

18130
A-0001-008 ISE SMART APP KNX AXIS GATEWAYS
18556 1-0004-005 ISE SMART CONNECT KNX PROGRAMMABLE, REG, TP1, 1 USB, 1 ETHERNET GATEWAYS
From electric meter to heater: in a straight forward manner, Programmable brings together KNX and devices which were not compatible previously. The development of individual integration logic only takes a few days. There has never been a lower threshold into the world of building automation.

Third party devices can be easily and reliably connected with the KNX bus. On the KNX side, there are up to 64 communication objects available with bit width and data point types which can be configured individually.

The IP and the USB interface can be used to communicate with third-party systems. For the very first time, Programmable is an affordable alternative to high-cost device development. Not only is the low price of the device convincing – further development is also reasonable because C# and VB.Net is used to implement the application. This allows the easy use of wide-spread and free-of-charge programming tools.

Features:

  • programming the application in C# and VB.Net
  • up to 64 KNX communication objects
  • IP and USB connection with third-party devices
  • includes KNX certification
  • for the latest version of ETS4 or ETS5
18556
1-0004-005 ISE SMART CONNECT KNX PROGRAMMABLE, REG, TP1, 1 USB, 1 ETHERNET GATEWAYS
19631 3-0001-004 KNX RF USB-Stick SYSTEM DEVICES

Convenient and wireless access to a KNX installation from a PC or laptop.
The device serves as an interface to KNX installations via radio, using the KNX RF standard. This enables the communication of KNX devices with PC tools.
The interface structure corresponds to a common USB stick (USB 2.0 type A). The device does not feature any operating or display elements.
A KNX RF/TP media coupler is required in the KNX system for communication with fixed-wired KNX TP components.
Features
• Supports the common EMI protocol (cEMI)
• Supply of device via the PC’s USB interface
• Connection of PC and KNX via KNX RF radio
• Extensions via firmware updates
• Address assignment, programming and troubleshooting of KNX devices via ETS from version 5
• Required standard Windows drivers are installed or activated automatically when device is inserted

Rated voltage: DC 5 V
Frequency: 868,3 MHz
Transmission power: max. 25 mW
Transmission range in free field: 100 m (typical)
USB connection: 2.0 Typ A
KNX communication: RF1.R, S-Mode
Ambient temperature: -10°C to +55°C
Dimensions: approx. 21mm x 59mm x 7,5mm

19631
3-0001-004 KNX RF USB-STICK SYSTEM DEVICES
19706 1-000A-008 ISE SMART CONNECT KNX VIEGA GATEWAYS

The ISE SMART CONNECT KNX VIEGA integrates the innovative Fonterra Smart Control single-room control by viega into the KNX system.
Up to five base stations can be controlled with the ISE SMART CONNECT KNX VIEGA.

Support of 5 base stations each with up to 8 room temperature controllers and 12 electrical outlets
 
Room temperature control

Power level control

Absence control

System information, such as error messages, actual temperature or updates

Simple integration in KNX (can be completely configured through ETS)

Extensions through firmware updates

19706
1-000A-008 ISE SMART CONNECT KNX VIEGA GATEWAYS
19720 1-000B-009 ISE SMART CONNECT KNX LOEWE GATEWAYS
The ISE SMART CONNECT KNX LOEWE can be used to easily integrate Loewe TV devices into
KNX.
ISE SMART CONNECT KNX LOEWE is a device of the KNX system and complies with the KNX guidelines

Below you will find the most important functions at a glance.
features
Separate control of up to two Loewe TV devices
Perhaps one resident wants to watch the morning news while another prefers music videos? Simply
control the TV separately.
TV devices on / off
Switch the TV device on and off
"Wake up" the TV device via Wake on LAN and then switch it on
Volume control
Switch the sound on and off
Increase / reduce the volume:
o In stages or directly
o To an absolute or a relative value
Program control
Change to the next or the previous program channel
Change to a particular program channel
Call browser
Transfer camera images, e.g. from an external camera
Call up websites
Parental control
Activate / deactivate child protection.
Block all stations irrespective of age. Suitable e.g. for using the TV device just as a screen just to
look at images or surf the internet.
Protect children from age-in-use programs
the program in question (starting with level "from age 3").
Showing notices on the TV device
Use up to 5 self-defined texts or dynamically display texts from other devices on the TV device, e.g.
"movement detected in the garden" from an outside camera.
Display notice as to OSD text.
Picture in Picture (PIP)
PIP mode on / off
Source selection
Flexibility of choice between the sources of the TV device, e.g. switch conveniently between HDMI
input and receivers
19720
1-000B-009 ISE SMART CONNECT KNX LOEWE GATEWAYS


推荐KNX产品
开关面板
智能仪表
MDT Catalog 2017
Iddero Verso Interactive Presentation

培训
免费在线研讨会
最新KNX新闻
全部新闻

最新KNX优惠促销
所有
下载
KNX - 所有厂商

FUTURASMUS KNX GROUP
联系我们
地址
Futurasmus全球合作伙伴
FOLLOW US
YouTube Channel
Weibo
LinkedIN
Google+

KNX++培训中心
Futurasmus培训中心
SPECIALIZED KNX WHOLESALER CERTIFIED KNX TRAINING CENTRE
Futurasmus KNX Group is a highly specialized and internationally active KNX Wholesaler, being our forte the excellent technical support we provide. You can visit our online catalogue in this website and, if you are a professional, ask for a non binding offer for your KNX projects. Should you be interested in buying KNX components, you are welcome to read our General Sales Conditions and contact our technicians and commercial agents per telephone, e-mail or online help. Since 2003 we have been a Certified Training Centre KNX++, which means that we are entitled to impart the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 KNX partners, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized KNX training worldwide (groups of at least 8 people) at training@futurasmus-knxgroup.org
USE OF COOKIES
We use our own and third-party cookies, analyzing your browsing habits in out website, with the finality of ensuring the quality, security and improvement of the offered services through the same. In the case that the user does not explicitly state whether to accept the installation of cookies, but continues using our website, it will mean that he has consented expressly, informing him about the possibility to block or remove the installed cookies on his computer by configuring the appropriate settings of the browser. You can get more information on this subject reading our "Cookies Policy".